HEDD 07 Operation Manual Download Page 4

EN

Heinz Electrodynamic Designs

STATUS LeDs

When we designed the Type 05, one of our guidelines was 

to keep the look as minimal and elegant as possible and to 

place the speaker controls on the backpanel. On the front 

of your speaker, all you will find is a nice front LED panel 

which indicates its operational status in the following way:

•  Left LED: Unused. Unlike our Type 07 and Type 30 

monitors, the Type 05 has a relatively limited amplifica-

tion power and does not need a specific overload LED / 

built-in limiter.  

•  The green LED “PWR” will indicate normal operational 

power-on status of the speaker. Green = Good! 

•  The white LED “SYNC” will only light up if you have 

inserted one of our HEDD Bridge extension card. The 

LED tells you that the speaker has synchronized to the 

digital source and is receiving an audio stream.

HeDD BrIDGe

So, to conclude, what is this thing we call a HEDD Bridge 

and what`s up with this cardslot on the back panel of your 

speaker 

(1)? Well, now is the time to actually stop talking 

about the analog side of things: One of the most unique 

aspects of this speaker is the fact that it can handle vari-

ous digital protocols.

The HEDD Bridge is a modular inputcard system that 

gives you USB2, AES3, and even AES67 / Dante, that is 

Audio-over-IP compatibility. Simply choose one of our 

available input modules and you are ready to enter the 

digital realm. With the latest developments in Audio-over-

IP in mind, this is nothing less than a world premiere: 

You can directly connect your computer to this monitor 

via a CAT 6 Ethernet cable and stream high resolution 

audio up to 96kHz. Or, if you are lucky enough to work in 

a complex multi-channel setup (Dolby Atmos, Auro 3D, 

etc.), you can feed multiple separate HEDD monitors with 

a single high-resolution audio stream while every speaker 

can be administrated individually via a control software. 

And this is just the beginning …

Introduction

EN

Heinz Electrodynamic Designs

DIG. 

THRU

AE

S IN

B3-AE

S3

AE

S3/EBU

BRIDGE

CH2 OUT

B4-USB

BRIDGE

CH2 OUT

D

an

te

B1-D

ANTE

BRIDGE

USB 2.0

B5-

WIRELE

SS

BRIDGE

L/R

CH2 OUT

B2

-AE

S67

BRIDGE

AES6

7

USB 2.0

AE

S67

Summary of Contents for 07














Reviews: