Ethernet Cable Hole
5
6
If your Ethernet cable has an RJ45 connector
installed, drill a 5/8 inch hole in the position
shown.
If you will install an RJ45 connector after the
Ethernet cable is drawn through the mullion,
a smaller hole can be created.
2x
F486
Form Mounting Hole Threads
The mounting screws provided are thread-forming
screws.
Summary of Contents for WindFall H604
Page 4: ...1 2 4 Disassemble Side Mount Remove Mounting Bracket From Front Bezel...
Page 7: ...6 7 7 2x F486 Remove Mounting Screws Fasten Mounting Bracket to mullion...
Page 9: ...9 9 10 Install Tablet Install Front Bezel...
Page 10: ...10 F529 11 12 4x Slide Front Bezel Onto Mounting Bracket Tighten Assembly Screws...
