hebvest
.
com
t 800.469.8908
|
f 407.264.6309
|
mike@hebvest
.
com
Commercial Single Door Undercounter Coolers
intended
use
controler operations
instructions
oper
ation
Only use this appliance for cooling and storage of food and beverage for commercial purposes.
Turn on:
1. Close the door of the appliance.
2. Ensure the power switch is set to [O] and insert plug into socket.
3. Switch on the Power{I}. The current temperature within the appliance is displayed.
4. The on the display will flash for 3-min to indicate a delay between the motor
compressor being stopped and then restarted.
Temperature setting and control
Thermoatat display and contro panel
How to see the set point:
Push and immediately release the SET key, the set point will be showed;
Push and immediately release te SET key again or wait about 5s to return to normal visualization.
How to change the set point:
Push the SET key for more than 2 seconds to chagne the set point value;
The value of the set point will be displayed and the “oC” start blinking ;
To change the set value push the “ ”(up) or “ ” (down)arrows within 10s.
To memorze the new set point values push the SET key again or wait 10s.
Further instructions:
Refer to manufactures instruction manual or a qualified service agent for
modifications to the controller to your requirements.
Plug in the cabinet.
The display shows the actual cabinet temperature
Servicing
Make sure the appliance is switched off at the mains before service is performed on electrical parts