Battery Charging
Check the indicator lights on the front of the charger.
RED
light indicates that the charger is connected and
running from an A/C outlet.
YELLOW
light indicates that the battery is charging
GREEN
light indicates that the battery is fully charged
It will take a maximum of 6 hours to fully charge your battery. You
may interrupt the charging at any time.
As Li Ion batteries do not suffer from memory effect, it is not
required for the battery to be empty to commence a recharge.
Top-up charging everytime you’ve completed your cycle ride is
recommended.
Kept in good condition Li Ion battery will perform at least 350 full
charge cycles, with a retention of 70% from its original capacity.
Please use only the Li ion charger as provided.
a. Male charging plug
b, Charging cord
c. Charger specifications
d. Charger serial no.
e. Cooling fan
f. Fuse 10 Amps
g. Charger ‘ON’ LED
h. Charging status LED
i. Warning label
j. Power switch
k. A/C voltage switch
l. Power cord socket
15
i j k l
A new battery might take 2 - 3
charges before it performs at its
stated capacity.
Dispose your battery
responsibly, refer to your town
council or eZee dealer.
<
Before use, the battery needs to be fully charged. The battery charger works much like a
laptop computer charger and should be charged via a standard 110v/115v. outlet.
1. Insert charging plug into socket
on the battery
2. Plug power cord to charger
and to A/C outlet.
3. Turn the “ I/O “ switch
on the charger to I.
Unpacking
Model 500
Unpacking
Model 500
Battery Charging
and Care
Model 500
Battery Charging
Before your first ride, the battery needs charging. Bring it to a
wall socket. (220V - 230V AC EU other countries or 115V AC US)
1 2 3
4
5
6
1
Fuse / Fuse holder (30 amps)
2
Battery grip
3
Charging socket
4
Battery slot guides
5
Batter lock slot
6
Serial number, battery information
Insert charging plug into socket on
battery and connect charger power
cord to A/C outlet. Turn on A/C outlet.
Turn the ‘1’ switch on the charger.
It’s important that to follow this
sequence of actions everytime you
charge the battery.
Do not remove the plug by
pulling the cord, always grip the
charging port by its metal body.
<
6
14
a b c d
e f g h
7
a. warning label
b. on/off switch
c. a/c voltage switch set at 110v
d. power cord socket
Battery Charging
Before your first ride, the battery needs charging. Bring it to a
wall socket. (220V - 230V AC EU other countries or 115V AC US)
1 2 3
4
5
6
1
Fuse / Fuse holder (30 amps)
2
Battery grip
3
Charging socket
4
Battery slot guides
5
Batter lock slot
6
Serial number, battery information
Insert charging plug into socket on
battery and connect charger power
cord to A/C outlet. Turn on A/C outlet.
Turn the ‘1’ switch on the charger.
It’s important that to follow this
sequence of actions everytime you
charge the battery.
Do not remove the plug by
pulling the cord, always grip the
charging port by its metal body.
<
6
14
a b c d
e f g h
Summary of Contents for 500
Page 22: ......