1
2
6
3
5
4
Remove the lateral screw cap in order to reach the programming button. Once the
programming is complete, please put the screw cap back in place.
Caution: When synching the Heatstrip Heater with the MHS-FBM receiver, please make
sure to place the remote control in a perimeter less than 5 meters away from the
Heatstrip Receiver. When the programming mode is on, make sure to maintain the
power supply to the receiver as a potential power cut can damage the device.
Fix the sockets (1) on the bolts (2). Screw the bolts into the Heatstrip heater (5). Plug the
connector (3) to the heater and push the two elements together until you feel a click. Fix
the MHS-FBM receiver or the connecting element MHS-ESM (6) until it clicks with the
connector. Place the screws (4) in and turn tight to secure the fixing.
5
6
4.0 Assembly
Legend:
1x MHS Heatstrip (5)
1x MHS-FBM (6)
2x Sockets (1)
2x Bolts (2)
1x Power connector (3)
2x Screws (4)
Caution: antenna
is not removable.
Programming button
