Heatrae Sadia SUPREME 150 Fitting Instructions And User Manual Download Page 14

14

10.0 SPARE PARTS

The following comprehensive list of spare parts is available for your 
Supreme water heater.  Please refer to the rating label on the right hand 
side of your heater before ordering to ensure the correct spare parts are 
obtained.
Do not replace with parts not recommended by Heatrae Sadia - this will 
invalidate your guarantee and may render the installation dangerous.

1.   Element assembly 2.5kW (incorporating start dry cutout) ................ 95 606 952
2.   Element assembly sealing gasket ....................................................... 95 611 816
3.   Primary cutout (vent pipe) .................................................................... 95 612 001
4.  Solenoid valve assembly ...................................................................... 95 605 877
5.  Level sensor assembly (2.5ltr Model) .................................................. 95 606 971
 

Level sensor assembly (5.0/7.5ltr Model) ............................................ 95 606 972

6.  Circuit board (All Models) .................................................................... 95 615 076
7.  Outlet tap headwork (inc. handle) ...................................................... 95 605 019 
8.  Outlet tap stem .................................................................................... 95 605 832
9.  Outlet tap cup seal ............................................................................... 95 611 731
10.  Bezel for tap & cover ............................................................................ 95 605 020 
11.  Cover assy & screws (2.5ltr Model) ...................................................... 95 614 003
       Cover assy & screws (5.0ltr Model) ...................................................... 95 614 004
       Cover assy & screws (7.5ltr Model) ...................................................... 95 614 005
12.  Steam condenser assy (2.5ltr Model) .................................................. 95 607 015
       Steam condenser assy (5.0ltr Model) .................................................. 95 607 016
       Steam condenser assy (7.5ltr Model) .................................................. 95 607 018
13.  Condenser sealing gasket (2.5ltr Model) ............................................ 95 611 817
       Condenser sealing gasket (5.0ltr Model) ............................................ 95 611 819
       Condenser sealing gasket (7.5ltr Model) ............................................ 95 611 820
14.  ‘O’ ring kit ............................................................................................. 95 611 002
15.  Manifold assy 2.5ltr ............................................................................... 95 607 206
       Manifold assy 5.0ltr ............................................................................... 95 607 207 
 

Manifold assy 7.5ltr ............................................................................... 95 607 208

16.  Outlet spout plastic - tank ................................................................... 95 604 668
17.  Outlet spout - cover ............................................................................. 95 604 001
18.  Push fit connector 15x15 straight ........................................................ 95 607 509
19.  Push fit connector 15x15 elbow .......................................................... 95 607 510
20.  Tank (2.5ltr Model) ................................................................................ 95 608 926
       Tank (5.0ltr Model) ................................................................................ 95 608 927
       Tank (7.5ltr Model) ................................................................................ 95 608 928
21.  Tank drain & seal................................................................................... 95 608 929
22.  Start dry cutout (element) .................................................................... 95 612 691
23.  Solenoid valve coil ................................................................................ 95 605 839
24.  Fitting kit (2.5ltr Model) ........................................................................ 95 607 024
25.  Fitting kit (50./7.5ltr Model) ................................................................. 95 607 025
26.  Wiring harness 4-way ........................................................................... 95 612 006
27.  Wiring harness complete (2.5ltr Model) ............................................. 95 612 042
 

Wiring harness complete (5.0/7.5ltr Model) ....................................... 95 612 043

28.  Thermistor control/steam (not shown) ................................................ 95 612 696
29.  Steam plate assy (2.5ltr Model) ...........................................................   7 030 857
       Steam plate assy (5.0ltr Model) ...........................................................    7 030 858      

Steam plate assy (7.5ltr Model) ...........................................................   7 030 859

Summary of Contents for SUPREME 150





















Reviews: