6
3.3 MATERIALS
Backplate, cover and control knob- ABS
Element(s) - Copper sheathed rod type.
3.4 DIMENSIONS
Height - 235mm
Width - 151mm
Depth - 85mm
3.5 STANDARDS AND APPROVALS
Complies with the requirement of EN 60335-2-35.
British Electrotechnical Approvals Board (BEAB) approved.
Complies with European Community Directives (CE).
4.0 SITE REQUIREMENTS
WARNING
4.1 The handwash must not be positioned where it will
be
subjected to
freezing conditions.
WATER REQUIREMENTS
4.2 The installation must be in accordance with Water Regulations. To
ensure activation of the heating elements, the handwash must be
connected to a mains water supply with a minimum running pressure
of 0.1 MPa (1 bar) and a maximum static pressure of 0.7 MPa (7 bar).
If static pressure exceeds 0.7MPa (7 bar) fit a pressure reducing
valve to avoid damaging the appliance. If in doubt, the pressure
should be checked taking account of other services from the same
water supply which could cause the pressure to fall below the
minimum. The water supply can also be taken from a cold water
storage cistern provided there is a minimum head of 10m above the
appliance.
