7
4.2 Operation principle
The product is used to provide the user with hot
water for hand washing.
By activating the sensor the water flows through the
product which then switches the element on to heat
the water.
4.3 Standard delivery
Pack contents
`
Heater
`
Spout assembly
`
Fixing screws and plugs
`
Installation and user Instructions
4.4 Main components
See Figure 4
4. Description of the product
4.1 General description
This product is manufactured to British and
European Standard. These products are safe and
without risk provided they are installed, used and
maintained in good working order in accordance with
our instructions and recommendations.
Please read and understand these instructions
before starting work and retain them for later use.
This product is a purpose designed handwash
heater. The unit has a cooper sheath element
contained in a high grade plastic canister, this with
the flow control valve is assembled into high quality
ABS plastic backplate and front cover.
Sprayplate
Oultlet spout
Spout fixing nut
Pressure relief device (PRD)
Cable clamp
Terminal block
Flow control valve
Pressure switch
Inner
container
Front
cover
Thermal
cut-out
Thermostat
Rating label
Solenoid valve
Figure 4 – Internal components
