Heatrae Sadia CVE ECO 2, Installer And User Manual

Page: 20 / 28

20
8 Information for the installer
Installation
• The CVE ECO 2 RFT can be used in various
types of homes, both in new building as well as
renovation projects. The unit can be installed at
different places in the home, for example, in a loft
space, store room or cupboard.
• The extractor unit can be installed in all positions
using the mounting eyes provided against a wall,
on the ceiling and also on sloping surface.
• The CVE ECO 2 RFT should be installed
following the general and local safety and
installation regulations and the instructions in
this manual.
• The CVE ECO 2 RFT requires 230V 50 Hz mains
voltage. The tolerance for the mains voltage is
5%.
• A multipolar switch must be fitted with a minimum
contact gap of 3 mm.
• The feeder cable is 1.5 m long and the connection
is located towards the top of the unit.
• The ducts should be of the correct dimensions
(125 mm diameter or 204 X 60 rigid).
• Fans and ducting in or passing through unheated
voids or loft spaces should be insulated to reduce
the possibility of condensation forming.
The unit can be connected in various ways.