HeatPumps4Pools LCSPC-120, Installation And Maintenance Manual

Page: 17 / 26

16
PARAMETER CHECKING AND ADJUSTMENT
Parameter list
Some parameters can be checked and adjusted by the controller. Below is the parameter list.
No Parameter Name Range Default Remark
0 Memory function if power off 0
（
no
）
\1
（
yes
）
1 Adjustable
1 Timer cycle (every day or once) 0
（
once
）
\1
（
every day
）
1 Adjustable
2
X (Temp difference btw. inlet water
temp and setting water temp to start
compressor)
2-10
℃
3 Adjustable
3
Y (Temp difference btw. inlet water
temp and setting water temp to stop
compressor)
0-3
℃
0 Adjustable
4 The interval for defrosting 30-90Min 40Min Adjustable
5 Defrosting entry coil temperature
-30
℃
“-” not display
）
-7
℃
(only
display “7”)
Adjustable
6 Defrosting-off coil temp. 2-30 ℃ 20 ℃ Adjustable
7 Defrosting max. lasting time 0-15Min 8Min Adjustable
8 Compressor exhaust gas protection 90-120
℃
(B8)
℃
（ B8
stands
for
118 ℃）
Adjustable
9 Max Pool water temp set 40~65
℃
40 Adjustable
10 Water pump running mode 0 （ Special ） \1 （ Normal ）
0:
When target water temp
reached and unit
shutdown, water pump
keeps running.
1:
Water pump stops for
15 minutes (adjustable by
Parameter 11) after
compressor shutdown for
30 seconds, then water
pump starts running for 2
minutes.
NOTES: Under unit OFF
mode, if water pump
stops running for 12
hours, then water pump
will start running for 2
minutes.
1 Adjustable