15
Controller operations
1.
Parameter checking and setting.
Press
button for 10 seconds to enter the parameter checking interface, then press
to
Enter the parameter settings. You can now adjust parameters value with
. Then press
to
save and switch to other parameter settings.
NOTES:
a)
Press
button for 10 seconds to enter parameter checking and adjusting status.
b)
Press
to switch to different parameter checking.
c)
Press
enter into parameter settings status, and change parameter value with
,
Press
to save and switch other parameter settings.
d)
Under parameter checking status, press
to exit parameter checking status.
e)
Exit parameters settings automatically if no operation within 5 seconds.
Parameter settings will be invalid if the power fails within 10 seconds when adjusting parameters.
2.
button
Press
directly to enter CLOCK settings. The icon
will flash, then press
to set Hour with
,press
again to set Minute with
,then press
to save and complete settings.
If no need to set CLOCK, or CLOCK settings completed, press
directly to enter TIMER settings.
The icon
will flash, then press
to set Hour with
,press
again to set Minute
with
,then press
to save and complete settings. If not required, press
to enter into
the next group of Timer Settings.
When enter into setting TIMER ON/OFF till the displaying shows
“
--
：
--
”
,then press
to cancel
current TIMER settings.
NOTES:
1.2 Timers can be set but each Timer needs to a set ON/OFF time.
Summary of Contents for LCSPC-120
Page 1: ......
Page 7: ...6 OVERVIEW OF THE UNIT EXPLODED VIEW ECO 30 55 70...
Page 23: ...22 Models LCSPC 120 LCSPC 150 LCSPC 170...
Page 24: ...23 Models LCSPC 210...
