2
nOtice tO the reaDer
HEATMOR™ Inc. warrants and guarantees ALL HEATMOR™ Stainless Steel Outdoor Furnace Models.
HEATMOR™ Inc. does not warrant or guarantee any of the supporting products described within this
Operations and Maintenance Manual.
The contents, descriptions, directions, diagrams, and recommendations within this material are for the sole
purpose of suggested operation and maintenance methods.
Furthermore, HEATMOR™ Inc. shall not be liable for any special, consequential, or exemplary damages,
resulting, in whole or part, from the readers’ neglectful use, based upon the material within this Operations and
Maintenance Manual. Adhere to and follow all maintenance procedures set forth in this manual.
Person(s) operating an OWHH is/are responsible for operation in a manner that does not create a public or
private nuisance condition. Meeting the distance and stack height recommendations from the manufacturer
and requirements in applicable state and local regulations may not always be adequate to prevent nuisance
conditions in some areas due to terrain or other factors.
The methods of operation described within this Operations and Maintenance Manual have proven to be
effective for HEATMOR™ Inc. for the sole purpose of the operation of a HEATMOR™ Stainless Steel Outdoor
Furnace.
All formulas and figures listed within this Operations and Maintenance Manual are approximated and should be
read as such.
For additional copies or information, contact
HEATMOR™ Inc.
105 Industrial Park Court NE,
P.O. Box 787,
Warroad, MN 56763 USA
Phone: (218) 386-2769
Fax: (218) 386-2947
Website: www.heatmor.com
E-mail: [email protected]
Copyright © 2011 - HEATMOR™ INC.
All rights reserved. No part of this Operations and Maintenance Manual may be reproduced or used in any
form or by any means - graphic, electronic or mechanical, including photocopying, recording, taping, or
information storage and retrieval systems - without the written permission of HEATMOR™ Inc.
MODEL 200 SSRII
Printed - 2011
