Heatmiser TM1-NTS Instruction Manual Download Page 9

16

15

Time Clock 

Series

Model

: TM1-TS / TM1-NTS

All icons displayed simultaneously.

Factory reset is complete.

The thermostat has a reset function to restore all settings to their factory defaults.

To perform a factory reset, follow these steps.

• 

Press & hold the OFF key to turn the thermostat display OFF ...............................

• 

Press and hold the bottom left corner of the LCD for 10 seconds.

• 

All of the screen icons will appear for 2 seconds and then disappear.

• 

Press the ON key once to turn the thermostat display back ON ...........................

Factory Reset

During a holiday, the time clock will maintain TIMER OFF.
At the end of your holiday, the time clock will revert back to the programmed setting.

• 

Press HOLIDAY ..............................................................................................

• 

Enter the desired duration in days ........................................................

• 

Press DONE to confirm and exit .............................................................

To cancel a Holiday setting, reduce the holiday time to 00 days.

Holiday

Note:  A holiday period does not start until 00:00 the next day.  For example, if you set a holiday 
period on Friday for 2 days, Saturday will be counted as the first day and the time clock will 
revert back to the programmed schedule at 00:00 on Monday.

Holiday Icon
Holiday Days

Summary of Contents for TM1-NTS














Reviews: