background image

10

9

Time Clock 

Series

Model

: TM1-TS / TM1-NTS

To set the clock, follow these steps.

• 

Press PROG ................................................................................................................

• 

Press CLOCK ..............................................................................................................

• 

Use the Down key to set the hours ..................................................................

• 

Use the Up key to set the minutes ...................................................................

• 

Use the Day key to set the day of the week ..................................................

• 

Press DONE to confirm and exit ........................................................................

Setting the Clock

Hours

Change Hours

Minutes

Day

Change Minutes

Locking the Keypad

The time clock has a keypad lock facility. 

• 

To activate the lock press the bottom right corner of the display and hold for 10 secs.

• 

When activated, you will see the Keypad Lock symbol.

• 

To cancel, press the bottom right corner of the display again for 10 secs.

Clean Screen

Pressing              will disable all keys, providing you 15 seconds to wipe the screen 
clean before the keys are re-activated.

Keypad Lock Indicator

Summary of Contents for TM1-NTS














Reviews: