background image

10

9

Slimline 

Series

Model

: PRT-EN

Temperature Display

This thermostat can be setup to use an air sensor, floor sensor or both. 

The display will clearly show which sensor is being controlled by showing either: 

Note: Built in air sensor only MUST NOT be used to control electric underfloor heating. 

Floor sensor only or built in air & floor sensor together must be used.

When the thermostat is set to use both sensors, the room temperature will be displayed. 
To view the floor temperature, press and hold the            key until the Floor Temp is 

displayed on screen.

Room Temperature

Floor Temperature

Setting the Clock

To set the clock, follow these steps.

• 

With the thermostat turned ON, press the Clock key twice .................................

• 

Use the Up/Down keys to set the hours ..............................................................

• 

Press H to confirm settings ................................................................................................

• 

Use the Up/Down keys to set the minutes .........................................................

• 

Press H to confirm settings ...............................................................................................

• 

Use the Up/Down keys to set the day of the week ..........................................

• 

Press A to confirm settings and return to main display ..........................................

Day
Hours

Minutes

Summary of Contents for PRT-EN1 Slimline Series
















Reviews: