Installation Procedure
DO`s
1.Do Mount the thermostat should be mounted at eye level.
2.Do read the instructions fully so that you best from our product.
3.Do install the floor probe into a conduit so that it can be replaced
if necessary.
DON
’
T`s
1.Do not install near a direct heat source as this will effect the
workings of the thermostat.
2.Do not push hard on the LCD otherwise youwill damage the liquid
crystal display and this is not repairable.
Installation
The thermostat is designed to be flush mount, a back box of 35mm
should have been sunk in the wall prior to installation.
Step 1
Carefully separate the front half of the thermostat from the back
plate by placing a small flat head terminal driver in to the slots on
the bottom face of the thermostat.
5
Summary of Contents for PRT-E
Page 23: ......
