Heatmaster 120 TC Installation, Operation And Maintenance Instructions Download Page 35

Page: 35 / 68

HeatMaster TC :

664Y6800 • A

INSTALLATION

PACKAGE CONTENTS

The HeatMaster

25 / 35 / 45 / 70 / 85 / 120 TC boilers are delivered assembled and packaged.

At product reception and after removal of packaging, check the package contents

and that the appliance is free of damages.

Contents

•

Boiler

•

Installation, Operation and Maintenance

Instructions

•

System Control manual

•

Cover plate for the natural gas to propane

conv sticker

•

Ball condensate trap to be installed.

•

Safety valve kit to be installed (HM TC

equipped with a high efficiency pump only),

comprised of:

• A primary safety valve Ø 1/2" F

• A T-coupling 1/2" F - 1/2" M - 1/4" F (HM 120

TC only)

• A check-valve Ø 1/4" F - Ø 1/4" M

General remarks

•

The manufacturer reserves the right to change the technical characteristics and

features of its products without prior notice.

•

The availability of certain models as well as their accessories may vary according to

markets.

Summary of Contents for 120 TC





































































Search results

Summary of Contents for 120 TC

Reviews:

Heatmaster 120 TC, Installation, Operation And Maintenance Instructions, Page: 35 / 68

Search results

Summary of Contents for 120 TC

Reviews: