Heatilator Wood Burning Fireplace I100 Owner'S Manual Download Page 17

Page: 17 / 52

Before beginning the installation be sure the following
tools and building supplies are available:

Reciprocating saw

Framing material

Pliers Non-combustible

sealant

Hammer Gloves

Phillips screwdriver

Framing square

Flat blade screwdriver Electric drill and bits

Plumb line

Safety glasses

Level Tape

measure

1/2-3/4 in. length, #6 or #8 self-drilling screws

Misc. screws and nails

F. Tools and Supplies Needed

H. Inspect Fireplace and Components

WARNING! Risk of Fire and/or Explosion!

Damaged

parts could impair safe operation.

DO NOT

install dam-

aged, incomplete or substitute components. Keep

re-

place dry.

• Remove

replace and components from packaging and

inspect for damage.

• Vent system components and doors are shipped in

separate packages.

• Report to your dealer any parts damaged in shipment.

• Read all the instructions before starting the

installation. Follow these instructions carefully
during the installation to ensure maximum safety
and bene

G. Fireplace System Requirements

This

replace system requires:

• Refractory

Assembly

• Grate

Assembly

• Outside

Air

Hoods

- Duct must be installed, but sold separately.

Heatilator • I100 • 35144 • Rev AA • 11/08

Summary of Contents for Wood Burning Fireplace I100





















































Search results

Summary of Contents for Wood Burning Fireplace I100

Reviews:

Related manuals for Wood Burning Fireplace I100

Brands by name

Popular brands

Heatilator Wood Burning Fireplace I100, Owner'S Manual

Search results

Summary of Contents for Wood Burning Fireplace I100

Reviews:

Related manuals for Wood Burning Fireplace I100

Brands by name

Popular brands