4-03 29 480-1091
Constitution
EPA Certified Fireplace
Nbr
Brick Size
Qty in Set
1
13-1/2” x 4-1/2” x 1-1/4”
5
2
13-1/2” x 4-1/2” x 1-1/4” w/ 1-1/2” chamfer
2
3
12 x 4-1/2” x 1-1/4”
8
4
12-1/2” x 4-1/2” x 1-1/4”
2
8. Firebrick Replacement
The firebox of your fireplace is lined with high quality
firebrick, which has exceptional insulating properties.
There is no need to use a grate; simply build a fire
on the firebox floor.
Do not operate the fireplace
without firebrick.
3
2
3
3
3
3
3
3
3
2
1
4
1
1
1
1
4
3
3
3
3
3
3
1
1
1
1
1
3
3
4
4
2
2
IMPORTANT:
The bricks are very similar in size. Be
certain you have the proper brick in the correct location.
Measue the brick size for accuracy.
After the coals are completely cooled, remove all old
brick and ash from unit and vacuum out firebox.
1. Remove new brick set from box and lay out to
diagram as shown in Figure 29B
.
2. Lay bottom bricks in unit.
3. Install rear bricks on the top of the bottom bricks.
Slide top of bricks under clip on back of firebox
wall and push bottom of brick back.
4. Install side bricks. Slide top of brick under clips
on side of firebox and push the bottom of the brick
until it is flush with the side of the unit.
Figure 29A - Brick Pattern
Figure 29B - Brick Pattern
Use Part SRV28111 when ordering individual brick. Provide
brick dimension or copy this page, mark the desired brick and
take it to your authroized dealer.
