Heatilator • GB4336/GB4992 • 4003-085 Rev H • 04/06
27
Handle glass with care.
• Inspect the gasket to ensure it is
undamaged.
• Inspect the glass for cracks, chips or
scratches.
• Do NOT strike, slam or scratch glass.
• Do NOT operate appliance with glass
assembly removed, cracked, broken or
scratched.
• Replace glass assembly as a complete
assembly.
WARNING
H. Hood
The hood is shipped on top of the outer shell of the appli-
ance. Remove the hood from its shipping location. Locate
the four hood retaining clips and slide the hood into them.
The hood must be attached or a fi re hazard may result. See
Figure 12.10.
Figure 12.10 Installing the Hood
G. Glass Doors
I. Air Shutter Setting
• Closed
position
-
natural
gas
• Open
position
-
propane
Figure 12.11 Air Shutter
Note:
Glass doors are not optional in the Commonwealth
of Massachusetts. They are required.
If you have decided to install optional doors on your appli-
ance, please use them correctly. While operating your appli-
ance, you should either have the doors completely open or
completely closed, but never partially open.
Fire Risk
Combustion Fumes Risk
• Appliances
equipped
with
optional
glass
doors
must
be operated with doors fully
open or fully closed.
•
Only use glass doors certifi ed for use with
this appliance.
If doors are left partially open, gas and
fl ames may be drawn out of the appliance
opening.
WARNING
