2
200257-02
INSTALLATION
IMPORTANT: Do NOT use with dimmers
or timers.
For best performance, mount the fixture about
6 feet (1.8 m) above the ground.
1. Remove two decorative nuts.
2. Remove mounting plate.
3. Tighten mounting screws finger tight.
4. Attach mounting plate to junction box.
This fixture comes with a universal mounting
bracket. It is pre-assembled on the fixture to
fit the majority of junction box applications.
ON-TIME Switch at
1, 5, or 10 minutes
Mode Switching Summary
Flip light
switch off for
one second
then back on*
MANUAL MODE
AUTO
TEST
* If you get confused while switching modes,
turn the power off for one minute, then back
on. After the calibration time the control will
be in the AUTO mode.
D
ual
B
rite
®
Dimmer Control
Light comes on half bright for selected time af-
ter dusk (Off, 3 hr., 6 hr., until dawn). Selecting
OFF disables this feature. The motion sensing
features will continue to work as described
in this manual. If motion is sensed, the light
turns on full bright for the ON-TIME (1, 5, or
10 minutes) then returns to dim mode.
WARNING: Turn power off at circuit
breaker or fuse. Place tape over circuit
breaker switch and verify power is off
at the fixture.
Wire Path
Ground Screw
Fixture Screws
Note: We recommend having an assistant
help hold the lantern assembly during the
wiring process.
Wire Path
Ground Screw
Mounting Plate
Decorative Nut
Mounting Screw
Bracket
Mounting
Screws
Mounting Plate
Junction Box
