9
598-1373-01
AUTO
OFF
ON
SINGLE SWITCH INSTALLATION
FROM
POWER
SOURCE
BLACK
BLACK
WHITE
WHITE
BROWN
3-WAY
MOTION SWITCH
RED
BLACK
To EARTH
GROUND
SPECIAL INSTALLATIONS
WARNING: Turn power off at the fuse
or circuit breaker before wiring.
SINGLE MOTION SWITCh
INSTALLATION
Connect the wall switch as shown here.
*COMMON-Used for illustrative Purposes Only. Check Your Switch. The common may be in a different location, depending
on the brand of your switch.
RED is used to represent the travel wire between two standard three-way switches. This may not be the color used in all
installation. If you are not sure about your wiring, call an electrician for installation help. There is also a RED wire on the 3-way
motion switch. Check the instructions above closely and do not confuse the two.
TYPICAL 3-WAY INSTALLATION
WHITE
FROM
POWER
SOURCE
BLACK
WHITE
RED
(In Wall)
RED (In Wall)
BLACK
WHITE
BLACK
DUAL SWITCH INSTALLATION
AUTO
OFF
ON
WHITE
FROM
POWER
SOURCE
BLACK
WHITE
3-WAY
MOTION
SWITCH
3-WAY
MOTION
SWITCH
WHITE
BLACK
AUTO
OFF
ON
BLACK
BLACK
BROWN
RED
(3-WAY
MOTION
SWITCH)
BROWN
RED
(3-WAY
MOTION
SWITCH)
*COMMON
*COMMON
To EARTH
GROUND
To EARTH
GROUND
DUAL MOTION SWITCh INSTALLATION
If you want to have motion sensors at both 3-way
switches, connect them as shown below.
