background image

Mode:       On-Time        Works:  Day   Night

Test

5 Sec

x

x

Auto

1, 5 or 10 Min

x

Manual

To Dawn*

x

Accent

3,6 Hr, to Dawn

x

OPERATION

T M

®

Dual Brite™
Motion Sensing
Coach Light

Models SL-4180/84 - A

Features

• Light comes on when motion is detected.
• Automatically turns light off.
• Dusk Accent lighting.
• Photocell keeps the light off during day-

light hours.

Questions? Call 1-800-858-8501

8:00 AM to 4:45 PM Eastern Time,

weekdays.

 Lo sentimos, pero no podemos contestar

preguntas en español por teléfono.

Requirements

• The Light Control requires 120 volts AC.
• If you want to use Manual Override, the

control must be wired through a switch.

•  Some codes require installation by a

qualified electrician.

This package includes:

Grand

Manor

Tail Assembly

(Lantern & Coach)

Mounting screws

and wire

connectors

Candelabra

or

© Heath Company

Printed in Hong Kong

            595-5578

Set the ON-TIME switch
on the bottom of the  cover
plate to TEST.

               For TEST

TEST 1  5  10  MIN

 For MANUAL OVERRIDE

1 Second OFF

then...

                For  AUTO

Set ON-TIME switch to 1,
5 or 10 minutes.

TEST 1  5  10  MIN

Flip the light switch off for
one second then back on.

Manual override works
when the ON-TIME switch
is in any  position.

Manual override only works
at night because daylight
returns the sensor to AUTO.

Turn

light

switch

off for 10

seconds

then

back on*

Flip light

switch

off for 1

second

then on

ON-TIME

Switch at

1, 5 or 10

minutes

* Wait one minute for sensor to warm up.

Mode Switching Summary

... back on.

Dusk Accent Mode

Light comes on half bright for selected time
after dusk (Off, 3 hr., 6 hr., until dawn). If
motion is sensed, the light turns on full bright
for the ON-TIME (1, 5 or 10 minutes) then
returns to dim mode.

* resets to Auto Mode at dawn.

             TEST

             AUTO

     MANUAL OVERRIDE

Get user manuals: 

See SafeManuals.com

 

 

Summary of Contents for Reflex Dual Brite SL-4180-A

Page 1: ... connectors Candelabra or Heath Company Printed in Hong Kong 595 5578 Set the ON TIME switch on the bottom of the cover plate to TEST For TEST TEST 1 5 10 MIN For MANUAL OVERRIDE 1 Second OFF then For AUTO Set ON TIME switch to 1 5 or 10 minutes TEST 1 5 10 MIN Flip the light switch off for one second then back on Manual override works when the ON TIME switch is in any position Manualoverrideonlyw...

Page 2: ...e wires through notch in adaptor plate When wiring to additional standard fixture only Strip the motion sensor s red wire and connect to the standard light s black wire Connect all white wires together Total fixture ratings must not exceed 400W 3 3 A Turn power off at circuit breaker INSTALLATION Junction Box Horizontal Junction Boxes Only 1 Remove two nuts 2 Remove Mounting Plate 4 Screw in mount...

Page 3: ...on and Dual Brite switch to the off posi tion Adding Decorative Tail 2 Screw in exten sion bar 1 Remove decorative nut from bottom of fixture 3 Add tail piece and trim 4 Screw decorative nut back on TEST 1 5 10 MIN OFF 3 6 DUSK TO HOUR DAWN SPECIFICATIONS Range Upto30feet variesduring daylight hours Sensing Angle Up to 150 240 aimable Electrical Load 3 60 W candelabra 400W 3 3 A total Power Requir...

Page 4: ...HEATH ZENITH FIVE YEAR LIMITED WARRANTY This is a Limited Warranty as defined in the U S Consumer Product Warranty and Federal Trade Commission Improvement Act This warranty gives you specific legal rights and you may also have other rights which vary from state to state For a period of five years from the date of purchase any malfunction caused by factory defective parts or workmanship will be co...

Reviews: