Thank you for purchasing the Heater Jr. Pitching Machine. If you have any questions or comments
on how Heater Sports can improve the Heater, please call our 24 hour customer service hotline
at (800) 492-9334.
WARNING!
•
Do not put hands or
fingers in pitching machine.
• Make sure all persons are
clear of the ball path and away
from pitching machine before
pitching any ball.
• Make sure you pitch only
one ball at a time.
• Make sure all balls are
out of machine before
turning the pitching machine on.
• Do not stand in front of
pitching machine.
• Do not operate in moisture.
• This machine can cause
serious bodily injury if used
incorrectly.
• For adult operation only.
• Batter must wear NOCSAE
Approved Batting Helmet.
WARNING!
• Only use dimpled pitching
machine balls to pitch
to batters. Pitching machines
that use a wheel to throw
balls will throw real balls
inaccurately because of the
seams on the ball and may
hit a batter and cause
physical injury.
• Always have legs set on the
on the ground before
pitching to a batter or
the Heater Jr. Pitching
Machine may move and hit
the batter causing serious
physical injury.
• Make sure you pitch only
one ball at a time.
• Pitching Machine Operator
must stand behind protective
safety screen.
95 West 650 South • St. George, Utah 84770 • PH: 800-492-9334 • PH: 435-656-1756 • Fax: 435-688-0741
WARNING • WARNING • WARNING
• Make sure pitching machine is aimed and throwing properly before allowing
batter to step up and hit balls pitched from the Heater Jr. Pitching Machine.
• Make sure all persons stand clear of pitching machine and ball path.
• Make sure all persons are aware pitching machine is throwing balls.
• Power Cords over 20 feet can lose energy and cause the Heater to pitch slower than normal.
HEATER SPEED CONTROL DIAL SPEEDS
Knob Setting = 10, Est. Speed = 46 MPH • Knob Setting = 5, Est. Speed = 26 MPH
Knob Setting = 9, Est. Speed = 42 MPH • Knob Setting = 4, Est. Speed = 22 MPH
Knob Setting = 8, Est. Speed = 38 MPH • Knob Setting = 3, Est. Speed = 18 MPH
Knob Setting = 7, Est. Speed = 34 MPH • Knob Setting = 2, Est. Speed = 14 MPH
Knob Setting = 6, Est. Speed = 30 MPH • Knob Setting = 0, Est. Speed = 0 MPH
Model# HTR299
®
