A Division of World Sports Products, Inc.
95 West 650 South · St. George, Utah 84770 · PH: 800-492-9334 · Fax: 435-688-0741
www.HeaterSports.com · [email protected]
4
HOW TO ASSEMBLE (Cont.)
Step 3
- Slide Part D (Leg with Rubber Tip)
into Part C (Plastic Tripod Base) line up the
holes in Part C & Part D.
Step 4 -
Slide Part F (Flat Washer) onto Part
E (Bolt). Slide Part E & F (Bolt with Flat Washer)
through the holes in Part C & Part D (Leg and
Plastic Tripod Stand). Slide Part F (Flat Washer),
then Part G (Lock Washer), then Twist Part H
(Acorn Nut) into Place and Tighten.
Step 5
- Slide Part A (Top Tube with Flex-A-Tee Top)
Into Part B (Bottom Tube & Tripod). Loosen or Tighten the
Height Adjustment Knob for desired Height.
How to Fold for Easy Storage
-
Slide Part A (Top Tube with Flex-A-Tee Top) all the way into
Part B (Bottom Tube with Height Adjustment Knob), Tighten
Knob to Lock into Place. Lift Each Part D (Leg) out of the
Plastic Tripod and up to Part B (Bottom Tube
Height Adjustment Pole), Repeat
for each Leg for Quick & Easy Portability.
Part #H
Part #E
Part #G
Part #F
Part #F
Acorn Nut
Part #H
Lock Washer
Part #G
Flat Washer
Part #F
Plastic Tripod Base
Part #C
Leg with Rubber
EndPart #D
Part #D
Part #C
Part #A
Part #B
Bolt
Part #E
Flat Washer
Part #F
Close-up View
Note: Repeat Step 3 & 4 Until All
Three Legs Are Assembled.
