Heater Sports Flop-Top Flex-A-Tee FTBT2499TT Instructions Download Page 3

Page: 3 / 4

A Division of World Sports Products, Inc.

95 West 650 South · St. George, Utah 84770 · PH: 800-492-9334 · Fax: 435-688-0741

www.HeaterSports.com · [email protected]

HOW TO ASSEMBLE

Step 1

- Slide Part B (Bottom Tube with Height

Adjustment Knob) into the Top of Part C (Plastic

Tripod Base) and Align the Holes in Part B &

Part C.

Step 2

- Insert Part E (Bolt) through the Tripod,

then through the Pole. Add Part F (Flat Washer),

then Part G (Lock Washer), then Twist Part H (Acorn

Nut) into place on the end of the bolt & tighten.

Part #H

Part #E

Bolt #E

Flat Washer

Lock Washer

Acorn Nut

Part #G

Part #F

Close-up View

Part B

Part C

Plastic Tripod Stand #C

Bottom Tube with Height

Adjustment Knob #B

Summary of Contents for Flop-Top Flex-A-Tee FTBT2499TT

Page 1: ...uctions for proper and safe use of the Flop Top Flex A Tee Always wear a helmet with a guard Adult supervision is required Inspect the tee top tee stem tripod base and adjustment knob before each use...

Page 2: ...rts com 2 Part D Leg with Rubber Tip Qty 3 Part B Bottom Tube with Height Adjustment Knob Qty 1 Part C Plastic Tripod Base Qty 1 Part A Top Tube with Flex A Tee Top Qty 1 Part E Bolts Qty 4 If You Are...

Page 3: ...Knob into the Top of Part C Plastic Tripod Base and Align the Holes in Part B Part C Step 2 Insert Part E Bolt through the Tripod then through the Pole Add Part F Flat Washer then Part G Lock Washer...

Page 4: ...Tighten Step 5 Slide Part A Top Tube with Flex A Tee Top Into Part B Bottom Tube Tripod Loosen or Tighten the Height Adjustment Knob for desired Height How to Fold for Easy Storage Slide Part A Top T...