2
Warranty and Safety Information
©2019 Heatcraft Worldwide Refrigeration
General Safety Information
1. Installation and maintenance to be performed only
by qualified personnel who are familiar with this type
of equipment.
2. Some units are pressurized with dry air or inert gas.
All units must be evacuated before charging the system
with refrigerant.
3. Make sure that all field wiring conforms to the
requirements of the equipment and all applicable national
and local codes.
4. Avoid contact with sharp edges and coil surfaces.
They are a potential injury hazard.
5. Make sure all power sources are disconnected before any
service work is done on units.
Inspection
Responsibility should be assigned to a dependable individual at
the job site to receive material. Each shipment should be carefully
checked against the bill of lading. The shipping receipt should
not be signed until all items listed on the bill of lading have been
accounted. Check carefully for concealed damage. Any shortage
or damages should be reported to the delivering carrier. Damaged
material becomes the delivering carrier’s responsibility, and should
not be returned to the manufacturer unless prior approval is given
to do so. When uncrating, care should be taken to prevent damage.
Heavy equipment should be left on its shipping base until it has been
moved to the final location. Check the serial tag information with
invoice. Report any discrepancies to your Heatcraft Refrigeration
Products Sales Representative.
Warranty Statement
Seller warrants to its direct purchasers that products, including
Service Parts, manufactured by SELLER shall be of a merchantable
quality, free of defects in material or workmanship, under normal
use and service for a period of one (1) year from date of original
installation, or eighteen (18) months from date of shipment by
SELLER, whichever first occurs. Any product covered by this order
found to Seller’s satisfaction to be defective upon examination at
Seller’s factory will at SELLER’s option, be repaired or replaced
and returned to Buyer via lowest common carrier, or SELLER may
at its option grant Buyer a credit for the purchase price of the
defective article. Upon return of a defective product to SELLER’s
plant, freight prepaid, by Buyer, correction of such defect by repair
or replacement, and return freight via lowest common carrier, shall
constitute full performance by SELLER of its obligations hereunder.
SELLER shall have no liability for expenses incurred for repairs
made by Buyer except by prior, written authorization. Every claim
on account of breach of warranty shall be made to SELLER in
writing within the warranty period specified above – otherwise
such claim shall be deemed waived. Seller shall have no warranty
obligation whatsoever if its products have been subjected to
alteration, misuse, negligence, free chemicals in system, corrosive
atmosphere, accident, or if operation is contrary to SELLER’s or
manufacturer’s recommendations, or if the serial number has been
altered, defaced, or removed.
Seller makes no express warranties except as noted above. All
implied warranties are limited to the duration of the Express
Warranty. Liability for incidental and consequential damages is
excluded.
The forgoing is in lieu of all other warranties, express or implied,
notwithstanding the provisions of the uniform commercial code, the
Magnuson-Moss Warranty - Federal Trade Commission Improvement
Act, or any other statutory or common law, federal or state.
SELLER makes no warranty, express or implied, of fitness for any
particular purpose, or of any nature whatsoever, with respect to
products manufactures or sold by seller hereunder, except as
specifically set forth above and on the face hereof. It is expressly
understood and agreed that SELLER shall not be liable to buyer,
or any customer of buyer, for direct or indirect, special, incidental,
consequential or penal damages, or for any expenses incurred by
reason of the use or misuse by buyer or third parties of said products.
To the extent said products may be considered "consumer products,"
As defined in Sec. 101 of the Magnuson-Moss Warranty - Federal
Trade Commission Improvement Act, SELLER makes no warranty of
any kind, express or implied, to "consumers," except as specifically
set forth above and on the face hereof.
The following conditions should be adhered to when
installing this unit to maintain the manufacturers
warranty:
(a) System piping must be in accordance with good refrigeration
practices.
(b) Inert gas must be charged into the piping during brazing.
(c) The power supply to the unit must meet the following
conditions:
A. Three phase voltages must be +/- 10% of
nameplate ratings. Single phase must be within
+10% or -5% of nameplate ratings.
B. Phase imbalance cannot exceed 2%.
(d) All control and safety switch circuits must be properly
connected according to the wiring diagram.
(e) The factory installed wiring and piping must not be changed
without written factory approval.
(f) All equipment is installed in accordance with Heatcraft
Refrigeration Products specified minimum clearances.
WARNING:
Refrigerant can be harmful if it is inhaled. Refrigerant must be used and recovered responsibly.
Failure to follow this warning may result in personal injury or death.
Summary of Contents for H-IM-SDK
Page 7: ...7 Notes...
