manualshive.com logo in svg

Heat&Glo NORTH STAR, Installation & Operating Instructions Manual, Page: 36 / 36

Share
Download
Heat&Glo NORTH STAR Installation & Operating Instructions Manual Download Page 36

10-05 

36  

480-1081B

This  product  may  be  covered  by  one  or  more  of  the  following  patents:  (United  States)  4593510,  4686807,  4766876, 

4793322, 4811534, 5000162, 5016609, 5076254, 5113843, 5191877, 5218953, 5263471, 5328356, 5341794, 5347983, 

5429495, 5452708, 5542407, 5601073, 5613487, 5647340, 5688568, 5762062, 5775408, 5890485, 5931661, 5941237, 

5947112, 5996575, 6006743, 6019099, 6048195, 6053165, 6145502, 6170481, 6237588, 6296474, 6374822, 6413079, 

6439226,  6484712,  6543698,  6550687,  6601579,  6672860,  6688302B2,  6715724B2,  6729551,  6736133,  6748940, 

6748942, 6769426, 6774802, 6796302, 6840261, 6848441, 6863064, 6866205, 6869278, 6875012, 6880275, 6908039, 

6919884, D320652, D445174, D462436; (Canada) 1297749, 2195264, 2225408, 2313972; (Australia) 780250, 780403, 

1418504 or other U.S. and foreign patents pending.

Heat & Glo. a brand of Hearth & Home Technologies, Inc.

20802 Kensington Boulevard

Lakeville, MN 55044

www.heatnglo.com

Please contact your Heat & Glo dealer with any questions or concerns. 

For the number of your nearest Heat & Glo dealer,

please call 1-888-427-3973

DEALERSHIP WHERE PURCHASED:

______________________________________

_______________________________________

_______________________________________

DEALER TELEPHONE:  __________________

Your Records for Model:

SERIAL NUMBER:         __________________

DATE PURCHASED:      __________________

DATE INSTALLED:        __________________

NORTH STAR EPA FIREPLACE

CAUTION

Do NOT discard this manual.

•  Im por ta nt   ope r a t ing  a nd  m a in-

t e n a n c e   i n s t r u c t i o n s   i n c l u d e d .

•  Read, understand and follow these instruc-

tions for safe installation and operation.

•  L e a v e   t h i s   m a n u a l   w i t h   p a r t y 

responsible  for  use  and  operation.

Summary of Contents for NORTH STAR





































Reviews:

No comments