1
Quick Reference Guide
READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE
1. Before permanently placing your infrared heater, plug it into a
convenient outlet to verify that the circuit breakers
for the outlet are on.
2. The heater may emit a slight, harmless odor when first used.
This odor is normal and is caused by the initial heating of internal
heater parts and will not occur again.
3. If your electrical heater does not emit heat, consult your owner’s
manual for further information.
CAUTION
RISK OF ELECTRICAL SHOCK
DO NOT OPEN
NO USER-SERVICEABLE PARTS INSIDE
HIGH TEMPERATURE
KEEP DRAPERY AND OTHER FURNISHINGS AT LEAST 3.3 FEET / 1 METER
FROM THE FRONT AND SIDES OF THE ELECTRICAL HEATER.
WARNING:
1. WARNING: TO REDUCE THE RISK OF FIRE – KEEP COMBUSTIBLE MATERIAL
SUCH AS FURNITURE, PAPERS, CLOTHES, AND CURTAINS AT LEAST 3 FEET (0.9
M) FROM THE FRONT OF THE HEATER AND AWAY FROM THE SIDES AND REAR.
2. SERVICING SHOULD BE DONE ONLY WHILE THE ELECTRICAL HEATER IS
DISCONNECTED FROM THE POWER SUPPLY.
SPECIAL CHARACTERISTICS.
A) This heater is ideal for use all year round, even when central
heating has been turned off.
B) This heater produces a hot current of air.
UNPACKING AND INSTALLING THE ELECTRICAL HEATER.
1. Open the packaging carefully and remove the heater.
2. Remove and discard the plastic bag. Locate hardware and castor package.
3.
BE RESPONSIBLE HANDLING THE PACKING MATERIALS.
WARNING: KEEP PLASTIC WRAPPING AWAY FROM CHILDREN.
4. Keep the original packing for future transport and/or storage.
5. Keep the front of the unit, through which the heat is radiated,
at least 3.3 feet / 1 meter away from furniture, curtains and
other flammable objects / materials at all times.
6. Ensure there is a grounded socket nearby (back of the appliance).
7. The power cord must remain at the back of the appliance
and must not be in contact with any hot element.
CASTOR INSTALLATION
1. Carefully turn the heater on its back onto a towel to prevent any damage.
See Fig i below.
2. Mount each castor (4) in the predrilled holes. Tighten screws. See Fig ii
below.
3. Carefully return the heater to its working position. See Fig iii below.
IMPORTANT SAFETY INSTRUCTIONS
!
C
AUTION:
BEFORE OPERATING THIS
EQUIPMENT, PLEASE READ THESE
INSTRUCTIONS CAREFULLY.
!
SA 1965
SA 1965
MC
Call 1-877-744-3649 for assistance or email us at [email protected]
Fig. ii
Fig. i
Fig. iii
WAVE
HEAT
