5
Safety Instructions
• The unit must be placed with a minimum clearance of 100cm to the wall and 30cm
to the ceiling .
• The unit must be correctly installed according to the instructions . Make sure the
head is at least 1.8m from the floor.
•
The unit must be securely placed on a horizontal and flat surface.
• The unit operates at high temperature during operation . The unit will stay hot for
a period of time after shut down . There is potential danger if touching the heater
during this period .
•
Don’t place the unit close to a curtain and/or other flammable objects. Otherwise,
there will be a danger of fire.
• Don’t cover the unit with anything during operation or a short time after it’s
shut down .
• Don’t wrap the power supply cord on the unit .
• The unit must be handled with care, and avoid vibration or suddent impacts .
• The unit must be securely grounded during operation .
• If the unit gets damaged, it must be repaired by professional electricians .
• When the power supply cord is damaged, it must be replaced by authorised agent
or other professional people to avoid danger .
• The unit must not be positioned under a socket .
•
When assembling, keep clear from any packaging or flammable material.
• The unit must be supervised by adults if it’s used by a child .
• It is not safe to install the unit by a swimming pool, in a bathroom or shower area .
• The unit is for household use only . It is not safe to use on a building site,
greenhouse, barn or stable where there’s flammable dust.
• The head of the unit is at high temperature during operation . Unplug the unit and
wait till it cools before cleaning .
• Don’t use this unit in a place where causticity or volatile air exists, i .e . dust, steam,
gas, etc .
• Don’t use this unit as a cloth, towel or other textile material drier .
• Don’t use this unit as a sauna heater .
• Don’t use this unit as a room heater .
• Don’t use this unit in a place of animal propagating and raising .
• Don’t immerse this unit into water for cleaning .
• The unit should be plugged in a socket, which is easily visible and reachable .
•
Two dark points may exist on the surface of the heating elements during the first
few minutes after it is turned on . This is normal, and will not affect the performance
of the unit .
•
A tilt switch is fitted inside the unit for safety purposes.
• The unit should be plugged in a socket, which is easily visible and reachable .
