10
Connecting the LPG Gas Cylinder
Connecting the LPG Gas Cylinder
Before assembly, make sure all packing material has been removed . Flexible gas rubber
pipe (EN 1763-1) and clamps are supplied with this appliance and must be used . You
need to acquire an LPG gas cylinder. We recommend using the Umbra Tank Cover with
a 5kg gas bottle, however, any bottle size up to 13kg is suitable . The gas bottle must
be placed a minimum of 1 .8m from the heater . Replacement must be made as per the
instructions specified in the “Replace the gas cylinder” section of this instruction manual.
Be careful not to kink the flexible gas rubber hose.
1 . Make sure the appliance gas knob is turned “OFF” (full disk) before assembling.
2 . The cylinder must be kept at least 1.8m from the fire pit during use.
3 . Connect the regulator to LPG cylinder by hand by attaching to the top of the bottle and
securing in place using the black lever on the regulator .
4 . Connect the hose to the appliance and the regulator . Tighten the screw of the hose
clamp with a screwdriver .
5 . Perform a leak test outlined in the ‘Leakage Test’ section of this manual before
attempting to light the heater .
