34
Installing the Trim
Combustible materials may be brought up to the
specified clearances on the side and top front
edges of the fireplace, but
MUST NEVER
overlap
onto the front face. The joints between the
finished wall and the fireplace top and sides can
only be sealed with a 300
°
F. (149
°
C) minimum
sealant. Combustible material may overlap below
the glass.
WARNING: WHEN FINISHING THE
FIREPLACE, NEVER OBSTRUCT OR
MODIFY THE GLASS RETENTION
CLIP OR VALVE ACCESS OPENINGS.
!
Step 10
Installing Trim,
Logs, and Ember
Material
Marble, brass, brick, tile, or other non-combustible
materials can be used to cover up the areas around
the surround. When overlapping, be sure not to
obstruct the surround hanger brackets, glass
retention clip opening, or valve access openings.
Refer to Figure 1. The standard decorative surround
(diamond shaped) should never be fixed in place.
Figure 30. Install surround hanger brackets
SURROUND
HANGER
BRACKETS
1. Install surround hang-
er brackets below
n o n - c o m b u s t i b l e
board above the glass.
Using (4) screws from
manual bag - secure in
place with two screws
each.
___________________________________________
Shutter Settings
NG
LP
Burner
3/8”
SET
