USE
Getting started
Open the zipper on the battery pocket and connect the
battery to the cable before inserting it into the pocket.
The button will blink three times, if not, the battery needs
recharging.
For optimal comfort, make sure that the cables runs in a
smooth way.
Press and hold the button on the glove for ~3 seconds, until
the light turns on. The glove is now heating up, and the red
light should be blinking slowly. This process takes about 5
minutes. you can pres the button once more to go directly in
to one of the modes, this will however reduce the “heat boost
effect”
3
