70
Heat & Glo • SL-750TRS-IPI-E, SL-550TRS-IPI-E, SL-350TRS-IPI • 2120-901 Rev. U • 11/13
2120-945
STEP 6.
LOG #5 (SRV2117-705)
Place log #5 on log #2. Log #5
will mate with the
fl
at areas located on the top side of Log
#4. See Figure 5.
1
1
22
33
44
22
11
22
33
55
33
44
11
NOTCH
NOTCH
Figure 4.
Figure 5.
NOTCH
“BURNED” PORTION
POINTS DOWNWARD
Figure 3.
MATE WITH FLAT AREAS HERE
NOTCH
STEP 4.
LOG #3 (SRV2120-703)
Place log #3 on right
fl
at side of
burner assembly. The notch on the log should
fi
t over the
bar on the far right side of the grate. Push the log back
against the grate tab.
STEP 5.
LOG #4 (SRV2120-704)
Place log #4 so that the right
end sits in the notch or
fl
at spot of log #2. The left end of
the log will sit on the left grate tine and also contact the
vertical portion of the grate tine as shown in Figure 4. The
“burned” part of the log should be pointed downward.
