4/20/11
Heat & Glo • NorthStar EPA Fireplace • 480-1081E
Page 27
5. Timer Assembly Replacement
1. Remove both doors by lifting doors up and off of hinges.
2. Remove the black knob and spring handle.
3. Remove the outside air knob and then the 4 screws from
each corner of fascia and remove the fascia. Place on
protected surface.
4. Remove the 3 center bricks from back of fireplace and
all the floor bricks
.
5. Remove 2 Phillips head screws and pry open access
door in the bottom of the fireplace with a flat head screw-
driver. Figure 4.12.
6. Remove 2 screws from cover plate & pull cover plate
toward you. Figures 4.13 & 4.14. Use a flat head
screwdriver to pry the corner edge loose. Pry toward
the fireplace and then press down and out. Figure 4.15
Remove 2 screws
in cover plate
Cover Plate
Pry pointed edge
toward fireplace and
then down and out to
remove.
Cover Plate
Remove 2 screws & pry open door
Figure 4.11 Timer Assembly
Figure 4.12
Figure 4.13
Figure 4.14
Figure 4.15
CAUTION shock Risk!
Spring Handle
Black Knob
Linkage Arm
1/4” bolts
Timer Assemby
Cover Plate
Mechanical
Timer
