Heartway Medical Products S34 Pixi, User Manual

Page: 13 / 26

13
. OPERATION OF CONTROL PANEL
The power scooter is simple to operate. However, we recommend that you read carefully the following
instructions to become familiarized with your new vehicle.
.
A Word of Caution:
Before you turn the power on, always be aware of the environment that surrounds you to select your desired
speed. For indoor environments we recommend that you select the slowest speed setting. For outdoor operation
of this vehicle we recommend that you select a speed that is comfortable for you to control it safely.
The following steps are required to operate your vehicle safely with the controller.
1. Battery Indicator: When your scooter is switched on, the needle on the meter will move across the scale
from the left 'red' sector towards the 'green' sector, indicating the state of charge in your batteries. As the
power is used up in your batteries, the needle will slowly towards the 'red' sector indicating the state of
charge at that precise time. When the needle is fully over to the right, the batteries are fully charged. When
the needle falls towards the red sector , your batteries are losing power, but you will still have power to
spare. When the needle falls into the red sector, your batteries are low in power and need to be recharged
.
It
is wise to recharge your batteries when the needle enters the red zone (see Batteries and Battery Charging
section of this manual).
Button functions
2. High/Low Speed Adjustment: This allows you to pre-select your desired speed. The adjuster is
proportional to speed and can be set anywhere between minimum and maximum. Turn the adjuster knob
counter-clockwise to minimum for a very gentle operation, and clockwise towards maximum to increase
your speed.
Battery Indicator
Power ON/OFF Light
High/Low Speed Adjustment
Horn Button
Key