ASSEMBLY INSTRUCTION
1. Installing controller and connect cables
Slide the controller fixed bar (#4) into the frame tube to adequately position (Fig 2),
and then tighten the tension knob (Fig 3).
Tension
knob
Controller
fixed bar
(Fig 2) (Fig 3)
Assemble the controller (#3) on right armrest bracket with 2 screws.(See Fig 4).
After that, please connect the right male motor plug (in the controller cable) to female
motor plug (From motor) and make sure they are tightly connected. (See Fig 5)
(Fig 4) (Fig 5)
Right
motor plug
Please do the same way to connect
the left motor plug as the right one.
(See Fig 6)
(Fig 6)
7
