OPERATION
The power wheelchair is simple to operate. However , we recommend that you read
carefully the following instructions to become familiarized with your new vehicle.
A Word of Caution:
Before you turn the power on, always be aware of the environment that surrounds you
to select your desired speed. For indoor environments we recommend that you select
the slowest speed setting. For outdoor operation of this vehicle we recommend that
you select a speed that is comfortable for you to control it safely.
The following steps are required to operate your vehicle safely with the controller-can
use for HP8. (See Fig 21)
Battery
Condition LED
ON/OFF
HORN
SPEED CONTROL
(Fig 21)
A. Driving:
1.Controller ON/OFF Switch
Press the ON/OFF button (I/O) switch located in front of the joystick to activate
your power wheelchair. The battery condition meter will light up to indicate the
current charge of your battery. Pressing the ON/OFF button again will deactivate
the controller.
2.Speed Control
The speed control buttons allow you to set the forward speed to your desired
setting. Pressing the speed increasing button will set the speed at the faster
settings while the speed will slow down if you press the speed decreasing button.
The controller sets the reverse speed, acceleration and deceleration proportion-
ally and automatically for your safety.
12
