29
2" (5 cm) x34
Place the 48 x 72" panel onto wall frame with primed side up as shown. Note the lip
and square edges.
Use the gauge block to mark the 3/4" measurement on the wall stud. Locate the panel
5/8" down on the top plate. Secure panel with two 2" nails in the corners (Fig. A).
6
5
4
Nail the panel using 2" nails 6" apart on edges and 12" apart inside panel.
Ensure your wall frame is square by installing one panel and squaring frame.
Move to the opposite end. Using the long edge of the panel as a lever move the panel
side-to-side until you have a 3/4" measurement on the wall stud. Secure corner with
two 2" nails.
PARTS REQUIRED:
3/8 x 48 x 72"
(1 x 122 x 183 cm)
x2
3/4"
GAUGE BLOCK
SIDE WALL PANELS
DO
OR
5/8"
(1,6 cm)
48"
(122 cm)
3/4"
(1,9 cm)
3/4"
(1,9 cm)
LIP
EDGE
For squareness maintain 3/4" and
5/8" measurement along panel edge.
BEGIN HERE
There will be an overhang at
top and bottom.
6" (15 cm)
12" (30 cm)
3/4" Gauge Block
SQUARE
EDGE
Do not nail
in groove.
Fig. A
Fig. B
5/8"
(1,6 cm)
3/4"
(1,9 cm)
3/4"
(1,9 cm)
2 Nails
2 Nails
