5
Safety Instructions
Please check for any damage that may have
occurred during shipping. In the unlikely
event that you find any shipping damage,
inform your dealer immediately!
Legend cooktops consist of the cooktop body
and the backguard.
Tools required for assembly:
•
Screwdriver Phillips/Robertson
•
Utility knife
•
Level
You must have a qualified electrician con
-
nect the new range to be sure all electrical
codes and regulations are observed except
when range is equipped with a cord and
plug. A qualified gas technician must in
-
stall this appliance to ensure local installa-
tion codes and regulations are observed.
Preparing the Installation Site
Find the appropriate clearance/installation
diagram for your cooktop on the following
pages. Diagrams include installations with an
exhaust hood.
These diagrams will outline the required
opening for your cooktop and clearances
to cupboards, electrical outlets, and gas
outlet locations are also illustrated. Site
preparation can be made to have these utili-
ties ready prior to receipt of the cooktop.
Caution:
To avoid mishaps during the instal-
lation phase, ensure power to receptacle and
gas valve are off.
Installation Clearances
Should the cooktop be installed adjacent to a
refrigerator, it is important that there be a
minimum of 5” (13 cm) of space between the
two appliances for proper air circulation.
Installation of cabinet storage space above the
surface burners should be avoided to elimi-
nate the risk of burns or fire by reaching over
the surface burners.
Your cooktop should be level for best cooking
results. To verify, place a carpenter’s level on
top of the cooking surface. If leveling is
required, shim under cooktop.
Installation and Assembly
See page 3 and 4 -for 30” Legend
See page 5 and 6 -for 36” Legend
