E
MERGENCY
P
ROCEDURES
Once the chimney fire has expired, leave the
primary air control closed and let the fire in the
stove die out completely. The stove should not
be fired again until the stove, stovepipe, and
chimney are all thoroughly inspected for any
sign of damage. You must correct any damage
before using your stove again.
If you have a stovepipe or chimney fire, follow
these instructions:
1.
If the fire is too threatening, leave the area
and call the fire department immediately! If
not, perform the next three steps.
2.
Close the primary air control.
Hearthstone Quality Home Heating Products, Inc
®
Model 8370
7
3.
Close the stovepipe damper (if present).
4.
Keep the stove front, side and ash doors
closed!
▌
WARNING:
DO NOT ATTEMPT TO PUT OUT A
STOVEPIPE OR CHIMNEY FIRE BY
THROWING WATER ONTO THE
STOVE, STOVEPIPE, OR CHIMNEY.
THE EXTREMELY HIGH
TEMPERATURE ASSOCIATED WITH
SUCH FIRES CAN CAUSE INSTANT
ANEOUS STEAM AND SERIOUS
BODILY HARM.
HearthStone’s Thermo-Ceramic Baffle System
To enhance the combustion efficiency and reduce the emissions of the fire in your stove HearthStone QHHP, Inc.
has developed an advanced THERMO-CERAMIC baffle system. This system uses a lightweight, durable ceramic
material above the burner tubes to maintain the high temperatures in the secondary combustion area and
maintain the low emission – high efficiency combustion you desire. This new technology will not corrode, rust
dissolve or lose its strength, however it is vulnerable to puncture or cracking due to rough handling.
PLEASE EXERCISE CARE WHEN LOADING WOOD OR CLEANING YOUR STOVE,
NOT TO DAMAGE THE Thermo-Ceramic BAFFLE
Located directly above the burner tubes in the firebox, this white sheet of material will break if wood or cleaning
brushes impact it. Be careful when loading and cleaning your stove to not break this material. If this piece has
been fractured or a hole is punctured, it will cause the stove to function improperly. You must replace the board
through a qualified HearthStone dealer.