
I
NSTALLING
I
N
A
M
OBILE
H
OME
Follow these special requirements for installing
your stove in a mobile home.
Install the stove in accordance with 24 CFR,
Part 3280 (HUD)
Permanently attach the stove to your mobile
home’s floor. Use 3/8" holes in each leg
base to bolt down the stove.
Install one of the following Dura-Vent
Mobile Home Chimney & Connector Kits:
6DP-MH 6” Diameter S/N 9096N
7DP-MH 7” Diameter S/N 9196N
8DP-MH 8” Diameter S/N 9296N
Each kit includes:
Stainless spark arrester cap, storm collar,
Adjustable vented flashing – 0/12 –
6/12, Two 24” Dura/Plus* chimney
pipes, 24” support box with built-in
starter section and trim.
(UL or ULC approved equipment is
acceptable)
Chimney must be removed when
transporting Mobile Home.
▌
WARNING:
DO NOT INSTALL IN A SLEEPING ROOM
▌
CAUTION:
MAINTAIN THE STRUCTURAL INTEGRITY OF
THE MOBILE HOME
WALLS, FLOOR,
CEILING, AND ROOF WHILE YOUR STOVE IS
INSTALLED AND IN USE
.
Chimney Section
Chimney Cap
Stovepipe
Chimney is supported by Ceiling.
Typical Mobile Home Installation.
Storm Collar
Adjustable Roof
Flashing
Support Box
with built-in
Starter section
Hearthstone Quality Home Heating Products, Inc
®
Model 8370
17