Hearthstone
Quality Home Heating Products, Inc
® Manchester Model 8360
25
Maintenance
G
LASS
R
EPLACEMENT
P
ROCEDURES
WARNING: DO NOT OPERATE THIS APPLIANCE WITH THE GLASS PANEL REMOVED, CRACKED, OR
BROKEN. DO NOT SUBJECT THE DOOR TO ABUSE, SUCH AS STRIKING OR SLAMMING SHUT. ONLY A
QUALIFIED SERVICE PERSON SHOULD REPLACE THE GLASS PANEL.
Figure 15: Front Door assembly
1. Follow the instructions included with the replacement glass kit.
2. Remove the door.
3. Remove the screws from the glass retainer (use penetrating oil if necessary)
– lift the retainer off the glass.
Set aside for reinstallation.
4. Carefully lift the damaged glass out of the door and discard.
5. Remove any remaining glass and old gasket material.
6. Clean the screw holes and place a small amount of anti-seize compound in each one.
7. Place the gasketed new glass onto the door.
Ensure sticker is on the exterior face of the glass.
8.
Important!
Center the glass
and ensure that the edges of the glass are parallel with the edges of the
opening.
9. Check glass position again (centered, and parallel), then screw the glass retainer clips back on the door
using a crisscross pattern. Tighten the screws no more than 1/8
th
of a turn after they seat. The glass will
break at this point if not positioned correctly.
10. Apply a light film of anti-
seize lubricant on the door’s hinge pins if needed.
11. Install the door.
12. After 5 or 6 fires, check the glass retainer screws, and retighten if necessary.
Required Glass Kit:
Part Number: 90-58901
(Glass with gasket applied). Use only 5mm Ceramic IR, or
Neoceram IR glass. Contact your Hearthstone dealer.
Glass Pads (8)
Glass Clips (8)
Glass
Glass Gasket
Door Gasket
Door Frame
