Hearthstone Quality Home Heating Products, Inc.
Bristol DV Model 8762
29
5. Place log 4 on top of logs 1 as shown.
Photo 5
– Log 4 in Position
6. Gently place Log 5 in the indentation on the
burner and rest it on log 4 as shown.
Photo 6
– Log 5 in Position
7. Place small tufts of the Platinum Bright Embers
on the burner and log surfaces for additional
glow as desired
–
do not block burner ports
.
Photo 7
–Platinum Bright Embers
(Enlarged to Show
Detail)
Photo 8
– Log Set Detail, Top View
Installation of the Optional
Screens
To install the optional screens (Kit 97-59100
)
, you
must have access to the glass frames. Removal of
the top casting is all that is necessary to install the
screens (for access instructions see page 15).
Hang each screen by its folded lip on top of each
glass frame.
Removal of Log Set
CAUTION: THE LOG SET, BURNER, AND EMBERS
RETAIN HEAT AND CAN BE VERY HOT! ALLOW
2 TO 3 HOURS TO COOL AFTER PILOT LIGHT IS
TURNED OFF FOR SAFE HANDLING.
To remove the log set, follow the Installation of Log
Set instructions in the reverse order.
Completing the Installation
1. Close the firebox
– reverse the firebox
access procedure outlined on page 15.
2. Install
any
batteries
as
necessary.
Synchronize the Remote Transmitter and
Receiver (see page 35).
Ceramic Burner Fissures
The ceramic burner may develop surface fissures at
or after the initial burn. These fissures are normal,
and have no effect on the operation, or safety of the
stove.
However, if a crack is found that penetrates into the
fuel accumulation area below the ceramic surface;
discontinue operation until the stove is checked by a
qualified technician.
1
2
1
4
3
5
4
1
1
1
3
1
2
1
1
1
2
1
3
1
4
1
5
