Hearthstone Quality Home Heating Products, Inc ARIES 16/26/46 Series 8905, 8915, 8925
30
Synchronizing the Remote and Valve Receiver Module
A code is selected automatically for all Mertik Maxitrol electronics from among 65,000 random codes available.
The receiver must learn the code of the handset, which is performed at the factory. If for any reason your
appliance stops responding to remote commands, it may be necessary to re-sync the two components. To
access the Valve Receiver Module, follow the instruction on page 16. Once you have access to the Receiver,
p
ress and hold the receiver’s reset button
(see figure below)
until you hear two (2) beeps. The first beep is short
and the second beep is long. After the second beep, release the reset button. Within 20 seconds press the
Small Flame button on the handset until you hear two additional short beeps confirming the code is set. If you
hear one long beep, this indicates the code has failed or the wiring is incorrect.
Step 1: Locate Reset Button on Receiver
Step 2: Press and hold Reset button until
second beep is finished
Step 3: Within 20 seconds, press Small
Flame button on the remote
