3
Hearth & Home Technologies • Media Instructions for Appliances Fitted with STPR-MOD-KIT • 2488-945 • 2/17
Please contact your Hearth & Home Technologies
dealer with any questions or concerns.
For the location of your nearest Hearth & Home Technologies
dealer,
please visit www.hearthnhome.com.
Hearth & Home Technologies
7571 215th Street West, Lakeville, MN 55044
www.hearthnhome.com
TROUBLESHOOTING
After the initial start up burn, it may be necessary to adjust
the media placement to achieve the best
fl
ame appear-
ance. While
fl
ame height variation is normal, there may
appear to be higher peaks in some areas and low
fl
ame
peaks in other areas.
If the
fl
ame height appears to be excessively high in
some spots, applying more media to these areas on top
of the burner will help even out the
fl
ames. Spreading
the media as evenly as possible is the most effective way
to achieve optimal
fl
ame appearance and the most even
fl
ame heights. One or more test burns may be required
to watch the
fl
ames mature and see how even they look
before making adjustments.
Avoid using media pieces larger than two inches in diam-
eter, these can be disruptive to the
fl
ame patterns. If you
fi
nd exra large media pieces, discard.
