3
Hearth & Home Technologies • AMB-LIGHTS Installation Instructions • 2273-934 Rev. B • 9/14
Figure 6. LED Color Combinations
COLOR
TOP
SWITCH
MIDDLE
SWITCH
BOTTOM
SWITCH
OFF
IN
IN
IN
GREEN
OUT
IN
IN
RED
IN
OUT
IN
DARK BLUE
IN
IN
OUT
WHITE
OUT
OUT
OUT
YELLOW
OUT
OUT
IN
PURPLE
IN
OUT
OUT
LIGHT
BLUE
OUT
IN
OUT
LED Switch Operation
Three black switches are used to operate the exterior
lighting control for the
fi
replace. There are seven color
options. See Figure 6. Flipping a combination of these
three buttons activates the desired color. The chart in
Figure 6 shows the combinations for each of the seven
colors.
OUT
IN
Optional Top Mounting of LED Switch Box
If desired the LED switch box may be installed using the
top stud. See Figure 3 for top stud location. In this case,
the extension wire, included in the AMB-LIGHTS Kit, must
be used between the LED switch box and the LED strips/
wire assembly. See Figure 7. This will allow for enough
length to install the LED switch box on the top stud.
OUT
IN
OUTSIDE OF DECORATIVE FRONT
CENTER OF DECORATIVE FRONT
UNPAINTED MOUNTING TAB
UNPAINTED MOUNTING TAB
