background image

Hearth & Home Technologies  •  B41L-AU Owner Manual  • 2570-981 Rev. B  •  5/20

24

Reference Materials 

 

A. Accessories

Remote Controls, Wall Controls and Wall
Switches

After  a  qualified  service  technician  has  installed  the  

remote  control,  wall  control  or  wall  switch,  follow  the 

instructions supplied with the control installed to operate 

your fireplace:
For safety:
•  Install a switch lock or a wall/remote control with child 

protection lockout feature.

•  Keep remote controls out of reach of children.
See your dealer if you have questions.

Install  approved  accessories  per  instructions  included 

with accessories. Contact your dealer for a list of approved 

accessories.

It is recommended that optional accessories are installed 

prior to installation of finishing material.  The lower cover 

panel is removable and provides access for installation of 

the remote control upgrades. If finishing material is already 

installed,  the  optional  accessories  must  be  installed  by 

removing the base pan, burner and valve assembly.  Use 

only  Hearth  &  Home  Technologies-approved  optional 

accessories with this appliance.

WARNING! 

Risk  of  Fire  and  Electric  Shock! 

Use 

ONLY  Hearth  &  Home  Technologies-approved  optional 

accessories with this appliance. Using non-listed 

accessories could result in a safety hazard and will void 

the warranty. 

Optional Heat Managment Systems

After a service technician has installed the Heat-Zone® 

-240V or Passive Heat Kit, follow the instructions sup

-

plied with the kit for operation. Contact your dealer if you 

have questions.

Note: 

 Optional heat management systems kit must be

installed while the top of the appliance is accessible.

Optional Glass Refractory Kit

An optional glass refractory kit is available for B41L-AU 

model.    Follow  the  instructions  supplied  with  the  kit  for 

installation.  Contact your dealer if you have questions.

Optional Log Kits

Traditional or Driftwood Log kits are available for B41L-

AU model.  Follow the instructions supplied with the kit for 

installation.  Contact your dealer if you have questions.

Optional Stones Kit

An optional stones kit is available for use with the B41L-AU 

model. 

Optional Fan

After a qualified service technician has installed the fan, 

follow the instructions supplied with the fan kit to operate 

your fan.  Contact your dealer if you have questions.

Note:

  The optional fan can not be used with the Passive 

Heat kit.

Available Media Options:

This appliance is approved for use with the following:

• 

Decorative Glass Media

Follow the instruction supplied with the kit for installation.

 

Contact your dealer if you have questions.

Summary of Contents for B41L-AU





























Reviews: