Hearth & Home Technologies • AVFL48SSODK Outdoor Kit Installation Manual • 4102-955 Rev. A • 03/21
NOTE:
To improve the thermal insulation properties of
your outdoor kit, we recommend installing four (4) strips of
non-combustible insulation (not supplied) behind the facing
kit inside the perimeter of the outer frame. Before installing
the face, install insulation with a thin coat of construction
adhesive. See Figure 8.
11. Remove the screws that attach the top face to the top pan
so the outer stainless face can be installed. See Figure 8.
Remove screws before installing
outer stainless face.
Figure 8
12.
Install the outer stainless face and attach with five (5)
stainless screws across the top and four (4) screws on
both the left and right side of the face. See Figure 9.
Figure 9
13. Place four (4) pieces of insulation in the top insulation
box and install the box on the top of the appliance. See
Figure 10 and 11.
Figure 10
Figure 11
14.
Position appliance with outdoor kit in the final installation
location. Secure the installation brackets to the wall
framing. Install electrical supply and gas supply according
to installation instructions supplied with your appliance.
See Figure 12.
Installation Brackets
Figure 12
