hearandlearn.com.au
Redcat
Point to Pair
is part of the Hear and Learn technology family.
Offices Australia wide (03)93709355
15
15
SE
T-
U
P
&
OP
ER
AT
ION
Charging the Flexmike
THE FLEXMIKE SHOULD BE CHARGED BEFORE USE
It will take 5-6 hours for the Flexmike to obtain a full charge. A fully
charged Flexmike will last for up to 8 hours of use. If microphones are
used daily, they should be charged each night.
Replacement lithium polymer battery packs may only be purchased
through Lightspeed Technologies (part #L3.7V).
ATTACH LANYARD
Hang the Flexmike on the lanyard opposite
the magnetic clasp.
CONNECT CRADLE CHARGER
Plug power cord into the cradle charger and
then plug the AC end into an electrical outlet.
CHARGE FLEXMIKE
Place the Flexmike into the cradle.
The LED on the Flexmike power light will glow
red indicating charging has started.
It takes 5-6 hours to fully charge the Flexmike
battery. When charging is complete, the power
status light will glow green.
CHARGING IN PROGRESS
CHARGING COMPLETE
